Note: This is the 2012–2013 edition of the eCalendar. Update the year in your browser's URL bar for the most recent version of this page, or click here to jump to the newest eCalendar.
Program Requirements
Program credit weight: 138-139 credits
Entry into the Electrical Engineering Honours Program
The Honours program is a limited enrolment program and entry is highly competitive. There is no direct entry to the Honours program in the first year. Students may enter the Honours program in the following ways:
- Students from CEGEP will be admitted, on the basis of their grades, at the start of the third term.
- Students from outside Quebec will be admitted, on the basis of their grades, at the start of the fifth term.
To remain in the Honours program and to be awarded the Honours degree, a student must have completed at least 14 credits in each term since entering Electrical and Computer Engineering, except for the final two terms of their degree, and maintained a CGPA of at least 3.30 since entering Electrical and Computer Engineering. In either of their final two full terms (i.e., Fall and Winter, or Winter and Fall) students may drop below 14 credits, provided the combined load for the two terms is at least 16 credits. For more information, please contact the Departmental office at 514-398-3943.
-
CHEM 110 General Chemistry 1 (4 credits)
Overview
Chemistry : A study of the fundamental principles of atomic structure, radiation and nuclear chemistry, valence theory, coordination chemistry, and the periodic table.
Terms: Fall 2012
Instructors: Gauthier, Jean-Marc; Kakkar, Ashok K; Fenster, Ariel; Bohle, David (Fall)
Fall
Prerequisites/corequisites: College level mathematics and physics or permission of instructor; CHEM 120 is not a prerequisite
Each lab section is limited enrolment
-
CHEM 120 General Chemistry 2 (4 credits)
Overview
Chemistry : A study of the fundamental principles of physical chemistry.
Terms: Winter 2013
Instructors: Gauthier, Jean-Marc; Fenster, Ariel; Butler, Ian Sydney; Siwick, Bradley (Winter)
Winter
Prerequisites/corequisites: College level mathematics and physics, or permission of instructor: CHEM 110 is not a prerequisite
Each lab section is limited enrolment
-
MATH 133 Linear Algebra and Geometry (3 credits)
Overview
Mathematics & Statistics (Sci) : Systems of linear equations, matrices, inverses, determinants; geometric vectors in three dimensions, dot product, cross product, lines and planes; introduction to vector spaces, linear dependence and independence, bases; quadratic loci in two and three dimensions.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Cormier, Eric; Kelome, Djivede; Anderson, William J; Bailey, Michael (Fall) Anderson, William J; Candelori, Luca (Winter) Feng, Renjie (Summer)
3 hours lecture, 1 hour tutorial
Prerequisite: a course in functions
Restriction A: Not open to students who have taken MATH 221 or CEGEP objective 00UQ or equivalent.
Restriction B: Not open to students who have taken or are taking MATH 123, MATH 130 or MATH 131, except by permission of the Department of Mathematics and Statistics.
Restriction C: Not open to students who are taking or have taken MATH 134.
-
MATH 140 Calculus 1 (3 credits)
Overview
Mathematics & Statistics (Sci) : Review of functions and graphs. Limits, continuity, derivative. Differentiation of elementary functions. Antidifferentiation. Applications.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Trudeau, Sidney; Drury, Stephen W; Fox, Thomas F (Fall) Topaloglu, Ihsan (Winter) de Quehen, Victoria (Summer)
3 hours lecture, 1 hour tutorial
Prerequisite: High School Calculus
Restriction: Not open to students who have taken MATH 120, MATH 139 or CEGEP objective 00UN or equivalent
Restriction: Not open to students who have taken or are taking MATH 122 or MATH 130 or MATH 131, except by permission of the Department of Mathematics and Statistics
Each Tutorial section is enrolment limited
-
MATH 141 Calculus 2 (4 credits)
Overview
Mathematics & Statistics (Sci) : The definite integral. Techniques of integration. Applications. Introduction to sequences and series.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Lei, Antonio (Fall) Fox, Thomas F; Drury, Stephen W; Trudeau, Sidney (Winter) Bigdely, Hadi; Diaconescu, Oxana (Summer)
Restriction: Not open to students who have taken MATH 121 or CEGEP objective 00UP or equivalent
Restriction Note B: Not open to students who have taken or are taking MATH 122 or MATH 130 or MATH 131, except by permission of the Department of Mathematics and Statistics.
Each Tutorial section is enrolment limited
-
PHYS 131 Mechanics and Waves (4 credits)
Overview
Physics : The basic laws and principles of Newtonian mechanics; oscillations and waves.
Terms: Fall 2012
Instructors: Ragan, Kenneth J (Fall)
-
PHYS 142 Electromagnetism and Optics (4 credits)
Overview
Physics : The basic laws of electricity and magnetism; geometrical and physical optics.
Terms: Winter 2013
Instructors: Moore, Guy (Winter)
Winter
3 hours lectures, 3 hours laboratory in alternate weeks; tutorial sessions
Prerequisite: PHYS 131.
Corequisite: MATH 141 or higher level calculus course.
Restriction: Not open to students taking or having taken PHYS 102, CEGEP objective 00UR or equivalent
Laboratory sections have limited enrolment
Required Year 0 (Freshman) Courses (29 credits)
Note: Students in the Honours Electrical Engineering program complete the Year 0 (Freshman) courses before entering the Honours program, as explained above.
Generally, students admitted to Engineering from Quebec CEGEPs are granted transfer credit for these Year 0 (Freshman) courses and enter a 109- to 100-credit program.
For information on transfer credit for French Baccalaureate, International Baccalaureate exams, Advanced Placement exams, Advanced Levels, and Science Placement Exams, see and select your term of admission.
-
CHEM 110 General Chemistry 1 (4 credits)
Overview
Chemistry : A study of the fundamental principles of atomic structure, radiation and nuclear chemistry, valence theory, coordination chemistry, and the periodic table.
Terms: Fall 2012
Instructors: Gauthier, Jean-Marc; Kakkar, Ashok K; Fenster, Ariel; Bohle, David (Fall)
Fall
Prerequisites/corequisites: College level mathematics and physics or permission of instructor; CHEM 120 is not a prerequisite
Each lab section is limited enrolment
-
CHEM 120 General Chemistry 2 (4 credits)
Overview
Chemistry : A study of the fundamental principles of physical chemistry.
Terms: Winter 2013
Instructors: Gauthier, Jean-Marc; Fenster, Ariel; Butler, Ian Sydney; Siwick, Bradley (Winter)
Winter
Prerequisites/corequisites: College level mathematics and physics, or permission of instructor: CHEM 110 is not a prerequisite
Each lab section is limited enrolment
-
MATH 133 Linear Algebra and Geometry (3 credits)
Overview
Mathematics & Statistics (Sci) : Systems of linear equations, matrices, inverses, determinants; geometric vectors in three dimensions, dot product, cross product, lines and planes; introduction to vector spaces, linear dependence and independence, bases; quadratic loci in two and three dimensions.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Cormier, Eric; Kelome, Djivede; Anderson, William J; Bailey, Michael (Fall) Anderson, William J; Candelori, Luca (Winter) Feng, Renjie (Summer)
3 hours lecture, 1 hour tutorial
Prerequisite: a course in functions
Restriction A: Not open to students who have taken MATH 221 or CEGEP objective 00UQ or equivalent.
Restriction B: Not open to students who have taken or are taking MATH 123, MATH 130 or MATH 131, except by permission of the Department of Mathematics and Statistics.
Restriction C: Not open to students who are taking or have taken MATH 134.
-
MATH 140 Calculus 1 (3 credits)
Overview
Mathematics & Statistics (Sci) : Review of functions and graphs. Limits, continuity, derivative. Differentiation of elementary functions. Antidifferentiation. Applications.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Trudeau, Sidney; Drury, Stephen W; Fox, Thomas F (Fall) Topaloglu, Ihsan (Winter) de Quehen, Victoria (Summer)
3 hours lecture, 1 hour tutorial
Prerequisite: High School Calculus
Restriction: Not open to students who have taken MATH 120, MATH 139 or CEGEP objective 00UN or equivalent
Restriction: Not open to students who have taken or are taking MATH 122 or MATH 130 or MATH 131, except by permission of the Department of Mathematics and Statistics
Each Tutorial section is enrolment limited
-
MATH 141 Calculus 2 (4 credits)
Overview
Mathematics & Statistics (Sci) : The definite integral. Techniques of integration. Applications. Introduction to sequences and series.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Lei, Antonio (Fall) Fox, Thomas F; Drury, Stephen W; Trudeau, Sidney (Winter) Bigdely, Hadi; Diaconescu, Oxana (Summer)
Restriction: Not open to students who have taken MATH 121 or CEGEP objective 00UP or equivalent
Restriction Note B: Not open to students who have taken or are taking MATH 122 or MATH 130 or MATH 131, except by permission of the Department of Mathematics and Statistics.
Each Tutorial section is enrolment limited
-
PHYS 131 Mechanics and Waves (4 credits)
Overview
Physics : The basic laws and principles of Newtonian mechanics; oscillations and waves.
Terms: Fall 2012
Instructors: Ragan, Kenneth J (Fall)
-
PHYS 142 Electromagnetism and Optics (4 credits)
Overview
Physics : The basic laws of electricity and magnetism; geometrical and physical optics.
Terms: Winter 2013
Instructors: Moore, Guy (Winter)
Winter
3 hours lectures, 3 hours laboratory in alternate weeks; tutorial sessions
Prerequisite: PHYS 131.
Corequisite: MATH 141 or higher level calculus course.
Restriction: Not open to students taking or having taken PHYS 102, CEGEP objective 00UR or equivalent
Laboratory sections have limited enrolment
AND 3 credits selected from the approved list of courses in Humanities and Social Sciences, Management Studies, and Law, listed below under Complementary Studies (Group B).
Required Non-Departmental Courses
Revision, August 2012. Start of revision.
35 credits
-
CCOM 206 Communication in Engineering (3 credits)
Overview
Communication (CCE) : Written and oral communication in Engineering (in English): strategies for generating, developing, organizing, and presenting ideas in a technical setting; problem-solving; communicating to different audiences; editing and revising; and public speaking. Course work based on academic, technical, and professional writing in engineering.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Churchill, Andrew; Myles, Robert J; Atallah, Bassel; Sacks, Steven; Dechief, Diane; Baskind, Alana; Bider, Noreen Jane; Filion, Marianne (Fall) Dechief, Diane; Myles, Robert J; Filion, Marianne; Baskind, Alana; Churchill, Andrew; Sacks, Steven (Winter) Filion, Marianne; Myles, Robert J; Dechief, Diane; Churchill, Andrew; Atallah, Bassel (Summer)
-
CIVE 281 Analytical Mechanics (3 credits)
Overview
Civil Engineering : Kinematics of particles, dynamics of particles. Work, conservative forces, potential energy. Relative motion and general moving frames of reference. Central force fields and orbits. Dynamics of a system of particles. General motion of rigid bodies, angular momentum and kinetic energy of rigid bodies. Generalized coordinates and forces, Lagrange's equations.
Terms: Fall 2012
Instructors: Chu, Vincent H; Babarutsi, Sofia (Fall)
-
COMP 202 Foundations of Programming (3 credits)
Overview
Computer Science (Sci) : Introduction to programming in a modern high-level language, modular software design and debugging. Programming concepts are illustrated using a variety of application areas.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Rekleitis, Ioannis; Pomerantz, Daniel; Liu, Xue (Fall) Kienzle, Jorg Andreas; Pomerantz, Daniel (Winter) Pomerantz, Daniel (Summer)
3 hours
Prerequisite: a CEGEP level mathematics course
Restrictions: COMP 202 and COMP 208 cannot both be taken for credit. COMP 202 is intended as a general introductory course, while COMP 208 is intended for students interested in scientific computation. COMP 202 cannot be taken for credit with or after COMP 250
-
FACC 100 Introduction to the Engineering Profession (1 credit) *
Overview
Faculty Course : Introduction to engineering practice; rights and code of conduct for students; professional conduct and ethics; engineer's duty to society and the environment; sustainable development; occupational health and safety; overview of the engineering disciplines taught at 91ÉçÇø.
Terms: Fall 2012, Winter 2013
Instructors: Keane, Angela (Fall) Frost, David (Winter)
(1.5-0-1.5)
-
FACC 300 Engineering Economy (3 credits)
Overview
Faculty Course : Introduction to the basic concepts required for the economic assessment of engineering projects. Topics include: accounting methods, marginal analysis, cash flow and time value of money, taxation and depreciation, discounted cash flow analysis techniques, cost of capital, inflation, sensitivity and risk analysis, analysis of R and D, ongoing as well as new investment opportunities.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Jassim, Raad (Fall) Jassim, Raad (Winter) Jassim, Raad (Summer)
(3-1-5)
Restriction: Not open to students who have taken MIME 310.
-
FACC 400 Engineering Professional Practice (1 credit)
Overview
Faculty Course : Laws, regulations and codes governing engineering professional practice. Responsibility and liability. Environmental legislation. Project and organization management. Relations between engineer and client. Technical practice - analysis, design, execution and operation.
Terms: Fall 2012, Winter 2013
Instructors: Jassim, Raad (Fall) Boulet, Benoit (Winter)
-
MATH 262 Intermediate Calculus (3 credits)
Overview
Mathematics & Statistics (Sci) : Series and power series, including Taylor's theorem. Brief review of vector geometry. Vector functions and curves. Partial differentiation and differential calculus for vector valued functions. Unconstrained and constrained extremal problems. Multiple integrals including surface area and change of variables.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Sancho, Neville G F; Shirokoff, David (Fall) Roth, Charles (Winter) Eswarathasan, Suresh (Summer)
-
MATH 263 Ordinary Differential Equations for Engineers (3 credits)
Overview
Mathematics & Statistics (Sci) : First order ODEs. Second and higher order linear ODEs. Series solutions at ordinary and regular singular points. Laplace transforms. Linear systems of differential equations with a short review of linear algebra.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Karzhemanov, Ilya; Humphries, Antony Raymond (Fall) Sancho, Neville G F; Klemes, Ivo (Winter) Feys, Jan (Summer)
-
MATH 264 Advanced Calculus for Engineers (3 credits)
Overview
Mathematics & Statistics (Sci) : Review of multiple integrals. Differential and integral calculus of vector fields including the theorems of Gauss, Green, and Stokes. Introduction to partial differential equations, separation of variables, Sturm-Liouville problems, and Fourier series.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Klemes, Ivo; Jonsson, Wilbur (Fall) Choksi, Rustum; Sancho, Neville G F (Winter) Trudeau, Sidney (Summer)
-
MATH 270 Applied Linear Algebra (3 credits)
Overview
Mathematics & Statistics (Sci) : Introduction. Review of basic linear algebra. Vector spaces. Eigenvalues and eigenvectors of matrices. Linear operators.
Terms: Fall 2012, Winter 2013
Instructors: Trudeau, Sidney (Fall) Oberman, Adam (Winter)
Winter
(3-1-5)
Prerequisite: MATH 263
-
MATH 381 Complex Variables and Transforms (3 credits)
Overview
Mathematics & Statistics (Sci) : Analytic functions, Cauchy-Riemann equations, simple mappings, Cauchy's theorem, Cauchy's integral formula, Taylor and Laurent expansions, residue calculus. Properties of one and two-sided Fourier and Laplace transforms, the complex inversion integral, relation between the Fourier and Laplace transforms, application of transform techniques to the solution of differential equations. The Z-transform and applications to difference equations.
Terms: Fall 2012, Winter 2013
Instructors: Tsogtgerel, Gantumur (Fall) Pichot, Michael (Winter)
Fall and Winter
(3-1-5)
Prerequisite: MATH 264
Restriction: Open only to students in the Faculty of Engineering.
-
MIME 262 Properties of Materials in Electrical Engineering (3 credits)
Overview
Mining & Materials Engineering : Properties of a material continuum and crystalline state; properties of atoms in materials; conduction electrons in materials; electronic properties of semiconductors and metals; magnetic and thermal properties of materials; applications of electronic materials in semiconductor technology, recording media and transducers.
Terms: Fall 2012, Winter 2013
Instructors: Bevan, Kirk H. (Fall) Quitoriano, Nathaniel; Bevan, Kirk H. (Winter)
(3-1-5)
Restriction: Not open to students who have taken or are taking ECSE 212.
-
PHYS 271 Introduction to Quantum Physics (3 credits)
Overview
Physics : The observed properties of atoms and radiation from atoms. Electron waves. The Schroedinger Equation in one dimension. Quantum mechanics of the hydrogen atom. Angular momentum and spin. Quantum mechanics of many electron systems. Basic ideas of electrons in solids and solid state physics.
Terms: Winter 2013
Instructors: Gervais, Guillaume (Winter)
* Note: FACC 100 (Introduction to the Engineering Profession) must be taken during the first year of study.
Revision, August 2012. End of revision.
Required Electrical Engineering Courses
57 credits
-
ECSE 200 Electric Circuits 1 (3 credits)
Overview
Electrical Engineering : Circuit variables, analysis of resistive circuits. Network theorems (Kirchhoff's law, Ohm's law, Norton and Thevenin equivalent). Ammeters, voltmeters, and ohmmeters. Analysis methods (nodal and mesh analysis, linearity, superposition). Dependent sources and OpAmps. Energy Storage elements. First-order circuits.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Szkopek, Thomas (Fall) Szkopek, Thomas (Winter) Davis, Donald Peter (Summer)
-
ECSE 210 Electric Circuits 2 (3 credits)
Overview
Electrical Engineering : Second-order circuits. Sinusoidal sources and phasors. AC steady-state analysis. AC steady-state power. Laplace transform. Circuit analysis in the s-Domain. Frequency response. Mutual inductance and transformers. Two-port circuits.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Levine, Martin D (Fall) Chodavarapu, Vamsy (Winter) Levine, Martin D (Summer)
(3-2-4)
Prerequisite: ECSE 200
For Fall Term: Limited to Electrical Honours and Computer Engineering students only.
For Winter Term: Limited to Regular Electrical Engineering students only.
Tutorials assigned by instructor.
-
ECSE 211 Design Principles and Methods (3 credits)
Overview
Electrical Engineering : Engineering process: design specifications, parameters, optimization, implementation, troubleshooting and refinement; project management: scheduling, risk analysis, project control; case studies; design examples and project.
Terms: Fall 2012, Winter 2013
Instructors: Ferrie, Frank P; Lowther, David Alister (Fall) Ferrie, Frank P; Lowther, David Alister (Winter)
-
ECSE 221 Introduction to Computer Engineering (3 credits)
Overview
Electrical Engineering : Data representation in digital computers. Boolean algebra. Basic combinational circuits; their analysis and synthesis. Elements of sequential circuits: latches, flip-flops, counters and memory circuits. Computer structure, central processing unit, machine language. Assemblers and assembler language.
Terms: Fall 2012, Winter 2013
Instructors: Harmouche, Rola (Fall) Liboiron-Ladouceur, Odile (Winter)
(3-2-4)
Prerequisite: COMP 202
Tutorials assigned by instructor.
-
ECSE 291 Electrical Measurements Laboratory (2 credits)
Overview
Electrical Engineering : Experiments with fundamental electric circuits illustrating the principles and limitations of basic electrical and electronic instrumentation in typical measurement applications. Introduction to basic electrical laboratory practice, design of experiments, and safety procedures. Introduction to error analysis and application to laboratory measurements. Design of electric circuits and characterization.
Terms: Fall 2012, Winter 2013
Instructors: McFee, Steve J (Fall) Psaromiligkos, Ioannis (Winter)
(1-4-1)
Corequisite: ECSE 210
Lab hours assigned by instructor.
-
ECSE 303 Signals and Systems 1 (3 credits)
Overview
Electrical Engineering : Elementary continuous and discrete-time signals, impulse functions, basic properties of discrete and continuous linear time-invariant (LTI) systems, Fourier representation of continuous-time periodic and aperiodic signals, the Laplace transform, time and frequency analysis of continuous-time LTI systems, application of transform techniques to electric circuit analysis.
Terms: Fall 2012, Winter 2013
Instructors: Mahajan, Aditya (Fall) Labeau, Fabrice (Winter)
-
ECSE 304 Signals and Systems 2 (3 credits)
Overview
Electrical Engineering : Application of transforms to the analysis of LTI single-loop feedback systems, the discrete-time Fourier series, the discrete-time Fourier transform, the Z transform, time and frequency analysis of discrete-time LTI systems, sampling systems, application of continuous and discrete-time signal theory to communications LTI systems.
Terms: Fall 2012, Winter 2013
Instructors: Rose, Richard (Fall) Bajcsy, Jan (Winter)
(3-2-4)
Prerequisite: ECSE 303
Tutorials assigned by instructor.
-
ECSE 305 Probability and Random Signals 1 (3 credits)
Overview
Electrical Engineering : The basic probability model, the heuristics of model-building and the additivity of probability; classical models; conditional probability and Bayes rule; random variables and vectors, distribution and density functions, expectation; statistical independence, laws of large numbers, central limit theorem; introduction to random processes and random signal analysis.
Terms: Fall 2012, Winter 2013
Instructors: Champagne, Benoit (Fall) Caines, Peter Edwin (Winter)
-
ECSE 322 Computer Engineering (3 credits)
Overview
Electrical Engineering : Data structures (arrays, lists, stacks, queues, dequeues and trees) and their machine representation and simple algorithms. Peripheral devices: printers, keyboards, magnetic type drives, magnetic disc drives. Peripheral interfacing and busses. Introduction to operating systems. System integration. Computer systems and networks.
Terms: Fall 2012, Winter 2013
Instructors: Arbel, Tal (Fall) Lowther, David Alister (Winter)
-
ECSE 323 Digital System Design (5 credits)
Overview
Electrical Engineering : Minimization and synthesis of combinational logic and finite state machines. Synthesis of synchronous and asynchronous sequential circuits. Principles of control design. Basic concepts in design for testability. The laboratory experiments involve the design and testing of digital systems using small and medium scale integrated circuits. CAD software is used in the design process.
Terms: Fall 2012, Winter 2013
Instructors: Clark, James J; Gross, Warren (Fall) Clark, James J; Ferrie, Frank P (Winter)
-
ECSE 330 Introduction to Electronics (3 credits)
Overview
Electrical Engineering : Introduction to electronic circuits using operational amplifiers, PN junction diodes, bipolar junction transistors (BJTs), and MOS field-effect transistors (MOSFETs), including: terminal characteristics, large- and small-signal models; configuration and frequency response of single-stage amplifiers with discrete biasing. Introduction to SPICE. Simulation experiments.
Terms: Fall 2012, Winter 2013
Instructors: Roberts, Gordon W (Fall) Roberts, Gordon W (Winter)
(3-2-4)
Prerequisite: ECSE 210
Tutorials assigned by instructor.
-
ECSE 334 Introduction to Microelectronics (3 credits)
Overview
Electrical Engineering : Single-stage integrated-circuit amplifiers; differential and multistage amplifiers, integrated-circuit biasing techniques; non-ideal characteristics, frequency response; feedback amplifiers, output stages; digital CMOS logic circuits.
Terms: Fall 2012, Winter 2013
Instructors: Kanaan, Marwan (Fall) Kanaan, Marwan (Winter)
-
ECSE 351 Electromagnetic Fields (3 credits)
Overview
Electrical Engineering : Maxwell's equations, electrostatics, magnetostatics and induction for power-frequency electrical engineering problems.
Terms: Fall 2012, Winter 2013
Instructors: Giannacopoulos, Dennis (Fall) Giannacopoulos, Dennis (Winter)
-
ECSE 352 Electromagnetic Waves (3 credits)
Overview
Electrical Engineering : Transient and steady state wave propagation in transmission lines. Telephone and radio frequency lines. Smith's chart and impedance matching. Maxwell's equations, Helmholtz's equations, Poynting's theorem. Plane waves, polarization, Snell's law, critical and Brewster's angle. Rectangular waveguides, optical fibres, dispersion. Radiation and antennas. S-parameters.
Terms: Fall 2012
Instructors: Davis, Donald Peter (Fall)
(3-2-4)
Prerequisite: ECSE 351
Tutorials assigned by instructor.
-
ECSE 361 Power Engineering (3 credits)
Overview
Electrical Engineering : Characteristics and components of power systems. Generation, transmission and utilization of electric power. 3-phase ac and dc systems. Fundamentals of electromechanical energy conversion. Ampere and Faraday's law. Magnetic circuits. Systems of coupled coils. Torque and force. Rotating magnetic fields. Basic rotating machines.
Terms: Fall 2012, Winter 2013
Instructors: Rodolakis, Anthony (Fall) Bouffard, François (Winter)
-
ECSE 434 Microelectronics Laboratory (2 credits)
Overview
Electrical Engineering : Designing, building, and debugging electronic hardware using discrete transistors and circuit building blocks; Designing, simulating, laying-out, and post-fabrication experimental testing of an integrated circuit (IC). The laboratory experiments are designed to reinforce the microelectronics circuit theory studied in ECSE 334.
Terms: Fall 2012, Winter 2013
Instructors: Nabki, Frederic (Fall) Nabki, Frederic (Winter)
-
ECSE 498 Honours Thesis 1 (3 credits)
Overview
Electrical Engineering : A research project undertaken with close mentorship by a staff member and under the supervision of the course instructor. The thesis consists of defining an engineering problem, reviewing relevant background, acquiring/analyzing data, and seeking design solutions using appropriate simulation/analysis tools and experimental investigations.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Khazaka, Roni (Fall) Khazaka, Roni (Winter) Khazaka, Roni (Summer)
-
ECSE 499 Honours Thesis 2 (3 credits)
Overview
Electrical Engineering : A research project undertaken with close supervision by a staff member. A continuation of ECSE 498. The work consists of carrying out the research plan developed in ECSE 498 along with a seminar presentation at end of term.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Khazaka, Roni (Fall) Khazaka, Roni (Winter) Khazaka, Roni (Summer)
(0-3-6)
Prerequisite: ECSE 498
-
ECSE 543 Numerical Methods in Electrical Engineering (3 credits)
Overview
Electrical Engineering : DC resistor networks and sparse matrix methods. Nonlinear electric and magnetic circuits: curve-fitting; the Newton-Raphson method. Finite elements for electrostatics. Transient analysis of circuits: systems of Ordinary differential equations; stiff equations. Transient analysis of induced currents. Solution of algebraic eigenvalue problems. Scattering of electromagnetic waves: the boundary element method; numerical integration.
Terms: Fall 2012
Instructors: Giannacopoulos, Dennis (Fall)
Complementary Courses
17-18 credits
Technical Complemetaries
9 credits chose from 500-level ECSE courses OR 6 credits chosen from 500-level ECSE courses and 3 credits chosen from the following list of 400-level courses (no more than one 400-level course can be chosen as a technical complementary):
-
ECSE 425 Computer Organization and Architecture (3 credits)
Overview
Electrical Engineering : Trends in technology. CISC vs. RISC architectures. Pipelining. Instruction level parallelism. Data and Control Hazards. Static prediction. Exceptions. Dependencies. Loop level paralleism. Dynamic scheduling, branch prediction. Branch target buffers. Superscalar and N-issue machines. VLIW. ILP techniques. Cache analysis and design. Interleaved and virtual memory. TLB translations and caches.
Terms: Winter 2013
Instructors: Gross, Warren (Winter)
-
ECSE 427 Operating Systems (3 credits)
Overview
Electrical Engineering : Operating system services, file system organization, disk and cpu scheduling, virtual memory management, concurrent processing and distributed systems, protection and security. Aspects of the DOS and UNIX operating systems and the C programming language. Programs that communicate between workstations across a network.
Terms: Fall 2012, Winter 2013
Instructors: Liu, Xue (Fall) Maheswaran, Muthucumaru (Winter)
-
ECSE 451 EM Transmission and Radiation (3 credits)
Overview
Electrical Engineering : Microwave transmission through waveguides: impedance matching, microwave devices, filters and resonators; microwave transmission though free space; near and far field behaviour of electromagnetic radiators, simple antennas, antenna arrays, practical antenna parameters; the physics of the radio communication channel: reflection, diffraction and scattering and their macroscopic impact (multipath, fading).
Terms: Winter 2013
Instructors: Webb, Jonathan P (Winter)
(3-0-6)
Prerequisite: ECSE 352
Laboratory Complementaries
2-3 credits from the following:
-
ECSE 426 Microprocessor Systems (3 credits)
Overview
Electrical Engineering : Introduction to current microprocessors, their architecture, programming, interfacing and operating systems. The course includes lectures, use of crossassemblers, and simulators as well as laboratory experiments on actual microprocessor hardware.
Terms: Fall 2012, Winter 2013
Instructors: Zilic, Zeljko (Fall) Radecka, Katarzyna (Winter)
-
ECSE 431 Introduction to VLSI CAD (3 credits)
Overview
Electrical Engineering : The computer-aided design of digital VLSI circuits. Hardware description languages, automatic synthesis, design for testability, technology mapping, simulation, timing analysis, generation of test vectors and fault coverage analysis.
Terms: This course is not scheduled for the 2012-2013 academic year.
Instructors: There are no professors associated with this course for the 2012-2013 academic year.
-
ECSE 435 Mixed-Signal Test Techniques (3 credits)
Overview
Electrical Engineering : Purpose and economics of mixed-signal test, DC measurements. Accuracy and repeatability. DSP-based theory and its applications to parametric testing of analog filters, DACs, and ADC. Timing and PLL measurements. Design for Testability.
Terms: This course is not scheduled for the 2012-2013 academic year.
Instructors: There are no professors associated with this course for the 2012-2013 academic year.
-
ECSE 436 Signal Processing Hardware (3 credits)
Overview
Electrical Engineering : Review of basic concepts in signals and microprocessors. Digital Signal Processing microprocessor architecture. Finite precision effects, real-time constraints, assembly language optimization. Implementation of DSP algorithms on a DSP microprocessor platform. Lab experiments on FIR filtering, IIR filtering, FFT computation, LPC analysis, circular and bit-reversed addressing, ping-pong buffering and frame-based processing.
Terms: Fall 2012
Instructors: Labeau, Fabrice (Fall)
-
ECSE 450 Electromagnetic Compatibility (3 credits)
Overview
Electrical Engineering : Electromagnetic Compatibility (EMC), regulations and EMC requirements of electronic systems, non-ideal behaviour of circuit components, signal spectra, radiated emission and susceptibility, conducted noise, crosstalk, differential mode and common mode, shielding, and system design for EMC.
Terms: This course is not scheduled for the 2012-2013 academic year.
Instructors: There are no professors associated with this course for the 2012-2013 academic year.
-
ECSE 485 IC Fabrication Laboratory (2 credits)
Overview
Electrical Engineering : Essential processes for silicon semiconductor device fabrication: etching, diffusion, photolithography. Fabrication of large area PN junctions, selective area PN junctions and MOSFETs. Design and fabrication of simple MOS circuits. Electrical characterization of devices and circuits.
Terms: Winter 2013
Instructors: Shih, Ishiang (Winter)
-
ECSE 486 Power Laboratory (2 credits)
Overview
Electrical Engineering : Techniques of electric power, efficiency, torque, speed measurements. Starting, running and control of electric machines: dc, synchronous, induction types. Power electronic controllers. Each group of students has access to a compact experiment bench containing a set of micro-machines and all the necessary equipment.
Terms: Winter 2013
Instructors: Joos, Geza (Winter)
-
ECSE 487 Computer Architecture Laboratory (2 credits)
Overview
Electrical Engineering : Basic software tools used in the design, synthesis and analysis of computer and communication systems such as data-paths, switching circuits, and arithmetic and logic circuits. Behavioral and structural modeling of hardware designs in the IEEE standard hardware description language VHDL. Synthesis and implementation of hardware designs using Programmable Logic Devices.
Terms: Fall 2012
Instructors: Cooperstock, Jeremy (Fall)
-
ECSE 488 High Frequency Laboratory (2 credits)
Overview
Electrical Engineering : High frequency measurement techniques. Vector network analyzer and spectrum analyzer. Resistors, capacitors and inductors at high frequencies. High-level signal handling of a high-frequency bandpass amplifier. Electromagnetic interference (EMI) and spectrum coordination. Cavity resonators. Standing waves in waveguides. Reciprocity of microwave networks. Scattering parameters of a microstrip network.
Terms: This course is not scheduled for the 2012-2013 academic year.
Instructors: There are no professors associated with this course for the 2012-2013 academic year.
-
ECSE 489 Telecommunication Network Laboratory (2 credits)
Overview
Electrical Engineering : Practical insight into IP networking through hands on experience with network simulation software as well as common Internet monitoring and measurement tools. The experiments address MAC protocols, routing protocols, TCP, queuing disciplines and quality-of-service, network security and multimedia applications.
Terms: Winter 2013
Instructors: Rabbat, Michael (Winter)
-
ECSE 490 Digital Signal Processing Laboratory (2 credits)
Overview
Electrical Engineering : Experiments involving the digital processing of signals using computer-aided design tools for design, processing and visualization and real-time processing using DSP chips. Filter structures and design, multi-rate signal processing, filter banks, fast transforms, adaptive filtering, signal coding and quantization.
Terms: Winter 2013
Instructors: Leib, Harry (Winter)
-
ECSE 491 Communication Systems Laboratory (2 credits)
Overview
Electrical Engineering : Experimental studies and simulation of analog and digital transmission techniques. Performance of AM and FM systems. FSK and PSK modulation techniques and spectra. Sampling of analog signals, PCM and TDM techniques.
Terms: Fall 2012, Winter 2013
Instructors: Leib, Harry (Fall) Leib, Harry (Winter)
-
ECSE 492 Optical Communications Laboratory (2 credits)
Overview
Electrical Engineering : Hands-on experience of the physical layer of optical communications systems. Experiments involving optical fiber link characterization, laser measurements, beam divergence, coupling efficiency. Use of lasers, optical spectrum analyser, data generator, beam profiler, photodetectors, optical filters. Experiments are supported with simulation and analysis software.
Terms: Fall 2012
Instructors: Chen, Lawrence R (Fall)
-
ECSE 493 Control and Robotics Laboratory (2 credits)
Overview
Electrical Engineering : Experimental studies for the design of control systems, with particular emphasis on motion control as applicable to robotics. Modeling of DC motors and electro-mechanical systems. Controller design in the time and frequency domain as well as state space. Experimental examples of PID, lead-lag, full state feedback and LQR controllers.
Terms: Winter 2013
Instructors: Musallam, Wissam (Winter)
Complementary Studies
6 credits
Group A - Impact of Technology on Society
3 credits from the following:
-
ANTH 212 Anthropology of Development (3 credits)
Overview
Anthropology : Processes of developmental change, as they affect small communities in the Third World and in unindustrialized parts of developed countries. Problems of technological change, political integration, population growth, industrialization, urban growth, social services, infrastructure and economic dependency.
Terms: This course is not scheduled for the 2012-2013 academic year.
Instructors: There are no professors associated with this course for the 2012-2013 academic year.
Winter
-
BTEC 502 Biotechnology Ethics and Society (3 credits)
Overview
Biotechnology : Examination of particular social and ethical challenges posed by modern biotechnology such as benefit sharing, informed consent in the research setting, access to medical care worldwide, environmental safety and biodiversity and the ethical challenges posed by patenting life.
Terms: This course is not scheduled for the 2012-2013 academic year.
Instructors: There are no professors associated with this course for the 2012-2013 academic year.
Restriction: U3 and over.
-
CIVE 469 Infrastructure and Society (3 credits)
Overview
Civil Engineering : Infrastructure systems, historical background and socio-economic impact; planning, organization, communication and decision support systems; budgeting and management; operations, maintenance, rehabilitation and replacement issues; public and private sectors, privatization and governments; infrastructure crisis and new technologies; legal, environmental, socio-economic and political aspects of infrastructure issues; professional ethics and responsibilities; case studies.
Terms: This course is not scheduled for the 2012-2013 academic year.
Instructors: There are no professors associated with this course for the 2012-2013 academic year.
-
ECON 225 Economics of the Environment (3 credits)
Overview
Economics (Arts) : A study of the application of economic theory to questions of environmental policy. Particular attention will be given to the measurement and regulation of pollution, congestion and waste and other environmental aspects of specific economies.
Terms: This course is not scheduled for the 2012-2013 academic year.
Instructors: There are no professors associated with this course for the 2012-2013 academic year.
Restriction: Not open to students who have taken 154-325 or 154-425
-
ECON 347 Economics of Climate Change (3 credits)
Overview
Economics (Arts) : The course focuses on the economic implications of, and problems posed by, predictions of global warming due to anthropogenic emissions of greenhouse gases. Attention is given to economic policies such as carbon taxes and tradeable emission permits and to the problems of displacing fossil fuels with new energy technologies.
Terms: Winter 2013
Instructors: Galiana, Isabel (Winter)
-
ENVR 201 Society, Environment and Sustainability (3 credits)
Overview
Environment : This course deals with how scientific-technological, socio-economic, political-institutional and behavioural factors mediate society-environment interactions. Issues discussed include population and resources; consumption, impacts and institutions; integrating environmental values in societal decision-making; and the challenges associated with, and strategies for, promoting sustainability. Case studies in various sectors and contexts are used.
Terms: Fall 2012
Instructors: Badami, Madhav Govind; Bennett, Elena; Kosoy, Nicolas (Fall)
Fall
Section 001: Downtown Campus
Section 051: Macdonald Campus
-
GEOG 200 Geographical Perspectives: World Environmental Problems (3 credits)
Overview
Geography : Introduction to geography as the study of nature and human beings in a spatial context. An integrated approach to environmental systems and the human organization of them from the viewpoint of spatial relationships and processes. Special attention to environmental problems as a constraint upon Third World development.
Terms: Fall 2012
Instructors: Ford, James (Fall)
Fall
3 hours
-
GEOG 203 Environmental Systems (3 credits)
Overview
Geography : An introduction to system-level interactions among climate, hydrology, soils and vegetation at the scale of drainage basins, including the study of the global geographical variability in these land-surface systems. The knowledge acquired is used to study the impact on the environment of various human activities such as deforestation and urbanisation.
Terms: Fall 2012
Instructors: Moore, Timothy R; Chmura, Gail L (Fall)
Fall
3 hours
Restriction: Because of quantitative science content of course, not recommended for B.A. and B.Ed. students in their U0 year.
-
GEOG 205 Global Change: Past, Present and Future (3 credits)
Overview
Geography : An examination of global change, from the Quaternary Period to the present day involving changes in the physical geography of specific areas. Issues such as climatic change and land degradation will be discussed, with speculations on future environments.
Terms: Winter 2013
Instructors: Chmura, Gail L; Bush, Drew (Winter)
Winter
3 hours
-
GEOG 302 Environmental Management 1 (3 credits)
Overview
Geography : An ecological analysis of the physical and biotic components of natural resource systems. Emphasis on scientific, technological and institutional aspects of environmental management. Study of the use of biological resources and of the impact of individual processes.
Terms: Fall 2012, Summer 2013
Instructors: Meredith, Thomas C (Fall) Akman, Geraldine (Summer)
3 hours
Prerequisite: Any 200-level course in Geography or MSE or BIOL 208 or permission of instructor.
-
MECH 526 Manufacturing and the Environment (3 credits)
Overview
Mechanical Engineering : Course topics include: clean manufacturing, product and process design for minimizing materials and energy use, the product life cycle, impact of technology on the environment, environmental impact assessment, regulatory process, and managing the "political" process.
Terms: This course is not scheduled for the 2012-2013 academic year.
Instructors: There are no professors associated with this course for the 2012-2013 academic year.
(3-0-6)
Prerequisite (Undergraduate): Permission of the instructor
-
MGPO 440 Strategies for Sustainability (3 credits) *
Overview
Management Policy : This course explores the relationship between economic activity, management, and the natural environment. Using readings, discussions and cases, the course will explore the challenges that the goal of sustainable development poses for our existing notions of economic goals, production and consumption practices and the management of organizations.
Terms: Winter 2013
Instructors: Graham, Margaret (Winter)
Restriction: Open to U2, U3 students only
-
MIME 308 Social Impact of Technology (3 credits)
Overview
Mining & Materials Engineering : Critical examination of the socio-economic costs and benefits of technology, case studies of old engineering works and new technologies. The integration of applied ethics and engineering practice, analysis of basic concepts of technology assessment, the inter-connected processes of risk assessment, management, and communication.
Terms: This course is not scheduled for the 2012-2013 academic year.
Instructors: There are no professors associated with this course for the 2012-2013 academic year.
(3-0-6)
Enrolment encouraged by students outside the Faculty of Engineering
-
PHIL 343 Biomedical Ethics (3 credits)
Overview
Philosophy : An investigation of ethical issues as they arise in the practice of medicine (informed consent, e.g.) or in the application of medical technology (in vitro fertilization, euthanasia, e.g.)
Terms: Fall 2012
Instructors: Hirose, Iwao (Fall)
-
RELG 270 Religious Ethics and the Environment (3 credits)
Overview
Religious Studies : Environmental potential of various religious traditions and secular perspectives, including animal rights, ecofeminism, and deep ecology.
Terms: Fall 2012, Winter 2013
Instructors: Rosenberg, Eliza (Fall) Rosenberg, Eliza (Winter)
Fall: Macdonald Campus (Ste-Anne-de-Bellevue). Winter: Downtown Campus.
-
SOCI 235 Technology and Society (3 credits)
Overview
Sociology (Arts) : An examination of the extent to which technological developments impose constraints on ways of arranging social relationships in bureaucratic organizations and in the wider society: the compatibility of current social structures with the effective utilization of technology.
Terms: Fall 2012
Instructors: Smith, Michael R (Fall)
-
SOCI 312 Sociology of Work and Industry (3 credits)
Overview
Sociology (Arts) : The development of the world of work from the rise of industrial capitalism to the postindustrial age. Responses of workers and managers to changing organizational, technological and economic realities. Interrelations between changing demands in the workplace and the functioning of the labour market. Canadian materials in comparative perspective.
Terms: Winter 2013
Instructors: Del Balso, Michael (Winter)
-
URBP 201 Planning the 21st Century City (3 credits)
Overview
Urban Planning : The study of how urban planners respond to the challenges posed by contemporary cities world-wide. Urban problems related to the environment, shelter, transport, human health, livelihoods and governance are addressed; innovative plans to improve cities and city life are analyzed.
Terms: Fall 2012
Instructors: Thibert, Joel; Bornstein, Lisa (Fall)
(3-1-5)
* Note: Management courses have limited enrolment and registration dates. See Important Dates at .
Group B - Humanities and Social Sciences, Management Studies, and Law
3 credits at the 200 level or higher from the following departments:
Anthropology (ANTH
Economics (any 200- or 300-level course excluding ECON 227 and ECON 337)
History (HIST)
Philosophy (excluding PHIL 210 and PHIL 310)
Political Science (POLI)
Psychology (excluding PSYC 204 and PSYC 305, but including PSYC 100)
Religious Studies (RELG)
School of Social Work (SWRK)
Sociology (excluding SOCI 350)
OR one of the following:
-
ARCH 528 History of Housing (3 credits)
Overview
Architecture : Indigenous housing both transient and permanent, from the standpoint of individual structure and pattern of settlements. The principal historic examples of houses including housing in the age of industrial revolution and contemporary housing.
Terms: Winter 2013
Instructors: Sijpkes, Pieter (Winter)
(2-0-7)
Prerequisite: ARCH 251 or permission of instructor
-
BUSA 465 Technological Entrepreneurship (3 credits) *
Overview
Business Admin : Concentrating on entrepreneurship and enterprise development, particular attention is given to the start-up, purchasing and management of small to medium-sized industrial firms in an environment that would appeal to Engineering students. The focal point is in understanding the dilemmas faced by entrepreneurs, resolving them, developing a business plan and the maximum utilization of the financial, marketing and human resources that make for a successful operation.
Terms: Fall 2012, Winter 2013
Instructors: Younkin, Peter (Fall) McCully, Philip (Winter)
-
ENVR 203 Knowledge, Ethics and Environment (3 credits)
Overview
Environment : Introduction to cultural perspectives on the environment: the influence of culture and cognition on perceptions of the natural world; conflicts in orders of knowledge (models, taxonomies, paradigms, theories, cosmologies), ethics (moral values, frameworks, dilemmas), and law (formal and customary, rights and obligations) regarding political dimensions of critical environments, resource use, and technologies.
Terms: Fall 2012, Winter 2013
Instructors: Goodin, David (Fall) Ellis, Jaye Dana; Sieber, Renee; Hirose, Iwao (Winter)
Fall - Macdonald Campus; Winter - Downtown
Section 001: Downtown Campus
Section 051: Macdonald Campus
-
ENVR 400 Environmental Thought (3 credits)
Overview
Environment : Students work in interdisciplinary seminar groups on challenging philosophical, ethical, scientific and practical issues. They will explore cutting-edge ideas and grapple with the reconciliation of environmental imperatives and social, political and economic pragmatics. Activities include meeting practitioners, attending guest lectures, following directed readings, and organizing, leading and participating in seminars.
Terms: Fall 2012, Winter 2013
Instructors: Mikkelson, Gregory Matthew; Dressel, Holly; Brown, Peter Gilbert; Kosoy, Nicolas (Fall) Hirose, Iwao; Goodin, David; Posthumus, Stephanie (Winter)
Fall - Macdonald Campus; Winter - Downtown
Section 001: Downtown Campus
Section 051: Macdonald Campus
Prerequisite: ENVR 203
Restriction: Open only to U3 students, or permission of instructor
-
FACC 220 Law for Architects and Engineers (3 credits)
Overview
Faculty Course : Aspects of the law which affect architects and engineers. Definition and branches of law; Federal and Provincial jurisdiction, civil and criminal law and civil and common law; relevance of statutes; partnerships and companies; agreements; types of property, rights of ownership; successions and wills; expropriation; responsibility for negligence; servitudes/easements, privileges/liens, hypothecs/ mortgages; statutes of limitations; strict liability of architect, engineer and builder; patents, trade marks, industrial design and copyright; bankruptcy; labour law; general and expert evidence; court procedure and arbitration.
Terms: Fall 2012
Instructors: Ouellet, Patrick (Fall)
(3-0-6)
-
FACC 500 Technology Business Plan Design (3 credits)
Overview
Faculty Course : This course combines several management functional areas such as marketing, financial, operations and strategy with the skills of creativity, engineering innovation, leadership and communications. Students learn how to design an effective and winning business plan around a technology or engineering project in small, medium or large enterprises.
Terms: Fall 2012
Instructors: Avedesian, Michael M (Fall)
-
FACC 501 Technology Business Plan Project (3 credits)
Overview
Faculty Course : Students work in teams to develop a comprehensive business plan project based on a technological or engineering innovation while utilizing site visits.
Terms: Winter 2013
Instructors: Avedesian, Michael M (Winter)
-
INDR 294 Introduction to Labour-Management Relations (3 credits) *
Overview
Industrial Relations : An introduction to labour-management relations, the structure, function and government of labour unions, labour legislation, the collective bargaining process, and the public interest in industrial relations.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Guerin, Richard; Westgate, Chantal (Fall) Guerin, Richard; Westgate, Chantal (Winter) Guerin, Richard (Summer)
-
MATH 338 History and Philosophy of Mathematics (3 credits)
Overview
Mathematics & Statistics (Sci) : Egyptian, Babylonian, Greek, Indian and Arab contributions to mathematics are studied together with some modern developments they give rise to, for example, the problem of trisecting the angle. European mathematics from the Renaissance to the 18th century is discussed in some detail.
Terms: Fall 2012
Instructors: Kamran, Niky (Fall)
Fall
-
MGCR 222 Introduction to Organizational Behaviour (3 credits) *
Overview
Management Core : Individual motivation and communication style; group dynamics as related to problem solving and decision making, leadership style, work structuring and the larger environment. Interdependence of individual, group and organization task and structure.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Suissa, Zina; Fraser, James K; Rosenstein, Irving; Hewlin, Patricia; Sepinwall, Sharyn; Yao, Yongheng (Fall) Yao, Yongheng; Suissa, Zina; Fraser, James K; Rosenstein, Irving; Huising, Ruthanne; Noh, Sung Chul; Banerjee, Mallika (Winter) Sepinwall, Sharyn; Rosenstein, Irving; Fraser, James K (Summer)
Continuing Studies: requirement for CMA, CGA, the EA of AACI, and the Institute of Internal Auditors
-
MGCR 352 Marketing Management 1 (3 credits) *
Overview
Management Core : Introduction to marketing principles, focusing on problem solving and decision making. Topics include: the marketing concept; marketing strategies; buyer behaviour; Canadian demographics; internal and external constraints; product; promotion; distribution; price. Lectures, text material and case studies.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Mackalski, Robert; Chaxel, Anne-Sophie; Sarigollu, Emine; Mathur, Sameer; Royce, Charles; Delorme, Bruno; Etemad, Hamid (Fall) Mishra, Saurabh; Qiu, Chun; Cyrius, Fabienne; Mackalski, Robert; Nobel, Ralph; Royce, Charles (Winter) Wang, Wei-Lin; Delorme, Bruno (Summer)
Continuing Studies: requirement for the Institute of Internal Auditors, and the Canadian Institute of Management
-
ORGB 321 Leadership (3 credits) *
Overview
Organizational Behaviour : Leadership theories provide students with opportunities to assess and work on improving their leadership skills. Topics include: the ability to know oneself as a leader, to formulate a vision, to have the courage to lead, to lead creatively, and to lead effectively with others.
Terms: Winter 2013
Instructors: Fachin, Fernando (Winter)
Prerequisite: only BCom students require MGCR 222.
-
ORGB 423 Human Resources Management (3 credits) *
Overview
Organizational Behaviour : Issues involved in personnel administration. Topics include: human resource planning, job analysis, recruitment and selection, training and development, performance appraisal, organization development and change, issues in compensation and benefits, and labour-management relations.
Terms: Fall 2012, Winter 2013, Summer 2013
Instructors: Westgate, Chantal; Kutter, Elisabeth; Cohen, Lisa (Fall) Kutter, Elisabeth (Winter) Kutter, Elisabeth (Summer)
Prerequisite: MGCR 222
Requirement for the Institute of Internal Auditors
* Note: Management courses have limited enrolment and registration dates. See Important Dates at .
Language Courses
If you are not proficient in a certain language, no more than 3 credits will be given for one 6-credit course at the 100 level or higher in that language. A maximum of 3 credits of language courses will be counted toward the Complementary Studies requirements.
However, 3-6 credits may be given for language courses at the 200 level or higher that have a sufficient cultural component. These courses must be approved by the Engineering Student Centre (Frank Dawson Adams Building, Room 22).
Faculty of Engineering—2012-2013 (last updated Dec. 20, 2012) (disclaimer)
